Wall Mount Systems

Are you making the best promotional use of all those square metres of bricks and mortar?
Many buildings and walls present an un-tapped opportunity to display promotional messages and corporate signage. Banner Box Wall Mount systems can be used to display banners projecting at 90 degrees or flat to the wall.

Heavy Duty Wall Mount System:

The Heavy Duty Wall Mount system allows banners to be installed projecting at 90 degrees from the wall and has been designed to suit very large banner sizes. The unit comprises a tough steel wall mount bracket and large 60 mm diameter aluminium arm. Banner installation and change over is made easy with the use of a tension bar. In the standard configuration this system is suitable for banners with areas up to 5m2.


Standard Duty Wall Mount System:

Our most popular wall mount system has recently been upgraded with an enhanced bracket and is now available with an optional tensioner to ease fitting, adjusting and renewing the banner. Featuring an attractive circular steel bracket and aluminium arm, the Standard Duty system is suitable for use with banners with areas up to 2m2.



Light Duty Wall Mount System:

This is the ideal budget solution for the wall mounting of banners. Featuring a steel bracket with 25 mm diameter arm, the Light Duty system is supplied complete with end cap and collar. Banners are easily installed or changed by removing the clip connecting the arm to the bracket. Suitable for use with banners with areas
up to 1m2


Suction Mounted Banner System:

The Suction Mounted Arm is an innovative solution to a common problem, allowing installation of banners where drilling isn’t possible or space simply isn’t available for a conventional system.

Features at a Glance:
Mount on to any non-porous surface.
Installed in a matter of seconds. Can be used singly or in pairs.
Ideal in situations where planning authorities restrict the use of street signage.
Suction units are turned on and off with a removable key making them vandal resistant.
Suitable for use with banners with areas up to 1m2.
Twin heavy duty suction units with removable locking keys.
40 mm diameter x 500 mm length plastic arm fitted with end cap and collar.


Heavy Duty Face Fix System:

This system enables large banners to be secured flat to a wall with the ability to change and tension the banner easily. Features Heavy Duty steel brackets with pre-drilled 16 mm fixing holes, 60 mm aluminium cross bars, tension bar and stainless steel rigging screws and fittings. Banners are quickly installed and changed by sliding onto the cross bars and tightening the rigging screws.

Standard Duty Face Fix System:

For Banners up to 4m2 the standard Duty Face Fix System provides an ideal solution. Particularly suited to portrait orientation banners this system is based on the very heavy duty version illustrated, but uses 45mm dia tubing and spring tensioners. Banners are easily installed and changed. The springs ensure banners are always well tensioned but allow them to flex in gusty conditions.

Heavy Duty Wall Mount System
200mmx300mm steel wall mount bracket

Heavy Duty Wall Mount System
Marine grade stainless steel tensioner

Standard Duty Wall Mount System

Standard Duty Wall Mount System

Light Duty Wall Mount System

Suction Glass Mount System

Suction Glass Mount System

Face Fix System