The giantpole is a new banner / flag system designed to be easily transportable for use at different outdoor events.

The water base and pole design allow for outdoor use even in windy conditions.

H 5400mm
W 1100mm
Base width 800mm

Standard banner size 3300mm H X 1100mm W

Kit prices on application, discounts are available on quantity. Our competitive price policy means we are rarely beaten by the competition.

Precautions
• Follow installation manual and use only for banner hanging
• Fill up the base tank with 45 L and maintain level
• Empty base tank when moving
• Do not use in wind stronger than 14 meter/sec
• Slide the pole slowly when you draw it back (the rail inside may be broken)
• Notice 6 month warranty except in case of malfunction by careless handling
• Do not allow water to freeze inside base
• Product components are subject to change without notice

Banner specifications:
1. Seven eyelets are recommended to straighten up banner.
2. Eyelets should be punched as shown in the circle
3. Eyelets should be finished with folded fabrics to avoid tearing in strong winds.
4.Flag type banners are recommended printed by sublimation
techniques for outdoor use.

Open tap of base and fill with water

Set up pole on the centre of tank and slot in place

Insert supporter in the corner and slide snap rings

Slide four rings through pole

Set the arm on the top of pole and lock fixing bolt

Set up banner with rings

Slipde stopper at lowest ring to prevent banner rolling in windy conditions